Front Panel

The DVD/CD Duplicator control panel features an LCD display and four buttons. These buttons are described in the following table:

Press the Up arrow button to scroll up functions or menus.

Press the Down arrow button to scroll down functions or menus.

Press the ENT (Enter) button to execute a selected function.

Press the ESC (Escape) button to cancel a selected function or to return to the main menu.

source drive: Insert the disc to be copied into the source drive. Use the disc tray to load a DVD or CD into the drive. You can open the tray by pressing the Load/Eject button (if the tray fails to open, you can use the emergency

eject mechanism). You can close the tray by pressing the Load/Eject button.

Note: It is strongly recommended that you do not push the tray in to close it. Please press the Load/Eject button to eject or retract the tray. See Figure 8 on page 30.

target drive: Insert a blank disc into the target drive to make a copy of the source disc. You can open the tray by pressing the Load/Eject button (if the tray fails to open, you can use the emergency eject mechanism). You can

close the tray by pressing the Load/Eject button.

Note: It is strongly recommended that you do not push the tray in to close it. Please press the Load/Eject button to eject or retract the tray. See Figure 8 on page 30.

4

Rackmount DVD/CD Duplicator User’s Manual

Page 12
Image 12
Tascam DV-W11R user manual Front Panel