Allied Telesis 2.6.1 manual AppleTalk, Example output from the Show IPX Circuit command

104 AT-8800 Series Switch User Guide

Figure 24: Example output from the SHOW IPX CIRCUIT command.

IPX CIRCUIT information
Name	Circuit 1
Status	enabled
Interface	vlan11 (802.3)
Network number	c0e7230f
Station number	0000cd000d26
Link state	up
Cost in Novell ticks	1
Type20 packets allowed	no
On demand	no
Spoofing information
Keep alive spoofing	no
SPX watch dog spoofing	no
On SPX connection failure ....	UPLINK
On end of SPX spoofing	UPLINK
RIP broadcast information
Change broadcasts	yes
General broadcasts	yes
General broadcast interval ...	60 seconds
Maximum age	180 seconds
SAP broadcast information
Change broadcasts	yes
General broadcasts	yes
General broadcast interval ...	60 seconds
Maximum age	180 seconds
Filter information
Filters	none

AppleTalk

To create an AppleTalk port (interface) associated with the admin VLAN, use the command:

ADD APPLE PORT INTERFACE=vlan11

To display information about the ports configured for AppleTalk (Figure 25 on page 105), use the command:

SHOW APPLE PORT

Software Release 2.6.1 C613-02039-00 REV A