Bosch Appliances D6600, D6100 3.3Input Command Processing, ASCII Text Message to Automation, Port

Conettix D6600/D6100 Computer Interface Manual 3.0 Computer Communication Protocols

3.3Input Command Processing

Input devices, such as automation systems, send the commands described in Table 88 to the receiver. If the receiver does not recognize a command, it generates a REJECT COMMAND message, prints at connected printers, and sends an ASCII text message to the automation port.

The CPU programming in Menu Item 2.2.4 of the D6600/D6100 Receiver must be set to 1 to use input commands.

Table 88: ASCII Text Message to Automation

	Port
Set Time	The automation system, or other device,
	sends the command shown below to set the
	time at the D6600/D6100 if the
	D6600/D6100 is programmed to
	synchronize the time and date with the
	automation system.
	D6650	!Thhmm<CR>
	Mode:
	SIA	<seq><rec><line>[CSThhm
	Mode:	m]<CR>
		hh - hours (24 hour format)
		mm – minutes.
Set Date	The automation system, or other device,
	sends the command shown below to set the
	date at the D6600/D6100 if the
	D6600/D6100 is programmed to
	synchronize the time and date with the
	automation system.
	D6650	!Dmmddyy<CR>
	Mode:
	SIA	<seq><rec><line>[CSDmmd
	Mode:	dyy]<CR>
		mm - month, dd - day, yy – year
Stop Two	The automation system, or other device,
Way	sends the command shown below to stop a
Audio	two way audio session on the line specified.
	D6650	!Kn<CR>
	Mode:

SIA <seq><rec><line>[CLKnn]

Mode: <CR>

nn- line card number, 01-32.

Reject D6650 h3rrlsREJECTsCOMMANDsst

Command Mode:

SIA <LF><CRC><TAB><sequence

Mode: #><receiver#><line#>[RE

JECT COMMAND]<CR>

Table 89 shows the D6500 and SIA automation output formats for these input commands.

Table 89: Input Command Output Messages

	D6500 Mode	SIA Mode	Printer Output
Set	h1rrssssss	[NJT]	TIME SET
Time	ssssssXss2
	t
Set	h1rrssssss	[NJD]	DATE SET
Date	ssssssXss5
	1t
Stop	h1rrssssss	[CLK]	TWO WAY
Two	ssssssXss5		AUDIO STOP
Way	2t		STOP
Audio

52 Bosch Security Systems, Inc. 1/07 4998122703-01