Bosch Appliances D6100, D6600 manual Message sent to printer, Computer Communication Protocols

Conettix D6600/D6100 Computer Interface Manual 3.0 Computer Communication Protocols

Figure 19: Message sent to printer

mm/ddshh:mmsLxxsSCNsACCTsaaaaaa+++sACC saaaaaasCCCCsCCCCsCCCCsCCCCsC

For lines that are grouped, Gxx appears instead of Lxx.

Table 67: Scancom 4-16-1, 5-16-1, 6-16-1 -

	Available Upon Request (Message
	Type g) Printer Output
Characters		Description
SCN		Scancom.
Lxx:		Line number.
Gxx		Grouped line numbers.

3.2.18 Scancom 4-24-1, 5-24-1, 6-24-1 - Available Upon Request (Message Type h)

4-24-1 Example

SIA Mode Description

<LF><CRC><h><sequence#><receiver#><line#>[#aaaaaaCCCCsCCCCs CCCCs CCCCsCCCCsCCCCsC]<CR>

Table 68: Scancom 4-24-1, 5-24-1, 6-24-1 - Available Upon Request (Message Type h) Byte Description

Title	Description
LF	Standard line feed character.
CRC	Cyclical redundancy check number.
Message Type	h
sequence#	The message sequence number. The valid sequence number range is 0001 to 9999.
receiver#	The receiver gateway that sent the message. Valid digits are 01 to 99 for D6600/D6100.
line#	The line number of the line in the receiver gateway that sent the message. Valid digits are 00 to
(Line/Group #)	99. The receiver uses Line 0 (zero) for internal messages.
account#	The communicator's account number, up to six digits.
CCCC	Channels 1 to 4.
s	One space.
CCCC	Channels 5 to 8.
s	One space.
CCCC	Channels 9 to 12.
s	One space.
CCCC	Channels 13 to 16.
s	One space.
CCCC	Channels 17 to 20.
s	One space.
CCCC	Channels 21 to 24.
s	One space.
C	Supervisory channel.

Figure 20: Message sent to printer

mm/ddshh:mmsLxxsSCNsACCTsaaaaaa

+++sACCsaaaasCCCCsCCCCsCCCCsCCCC

++++++++++++++CCCCsCCCCsC

For lines that are grouped, Gxx appears instead of Lxx.

Table 69: Scancom 4-24-1, 5-24-1, 6-24-1 -

	Available Upon Request (Message
	Type h) Printer Output
Characters		Description
SCN		Scancom.
Lxx:		Line number.
Gxx		Grouped line numbers.

Bosch Security Systems, Inc. 1/07 4998122703-01 41