Bosch Appliances D6600, D6100 manual 3.2.8CFSK Message Type, CFSK Message Type I Byte Description

Conettix D6600/D6100 Computer Interface Manual 3.0 Computer Communication Protocols

3.2.8CFSK (Message Type I)

CFSK Example

SIA Mode Description

<LF><CRC><I><sequence#><Receiver#><line#>[#aaaaaaTTEE]<CR>

Table 49: CFSK (Message Type I) Byte Description

Title	Description
LF	Standard line feed character.
CRC	Cyclical redundancy check number.
Message Type	I (Capital I).
sequence#	The message sequence number. The valid sequence number range is 0001 to 9999.
receiver#	The receiver gateway that sent the message. Valid digits are 01 to 99 for the D6600/D6100.
line#	The line number of the line in the receiver gateway that sent the message. Valid digits are 00
(Line/Group #)	to 99. The receiver uses Line 0 (zero) for internal messages.
account #	The communicator's account number, up to six digits.
TT	Event code.
EE	Zone/User ID.

3.2.9Common Formats (Message Type <TAB>)

Defined Messages

SIA Example

SIA Mode Description

<LF><CRC><TAB><sequence#><receiver#><line#>[#aaaaaaaaaaaaaaaadata]<CR>

Table 50: Common Formats (Message Type <TAB>) Byte Description

Title		Description
	LF	Standard line feed character.
CRC		Cyclical Redundancy Check number.
Message Type		09 hex <TAB>
sequence#		The message sequence number. The valid sequence number range is 0001 to 9999.
receiver#		The receiver gateway that sent the message. Valid digits are 01 to 99 for the D6600/D6100.
line#		The line number of the line in the receiver gateway that sent the message. Valid digits are 00
(Line/Group #)		to 99. The receiver uses Line 0 (zero) for internal messages.
account#		The communicator's account number up to sixteen digits.
Data		This field contains message data codes such as event type, area number, point number,
		identification number, and so on.

The receiver gateway sends the 3-1, 4-1, 4-2, single round, double round, extended pulse formats, BFSK, Modem

IIor Modem IId messages in either D6500 Mode or SIA Mode, depending on the program option selected. The receiver gateway also sends internal and Modem IIIa² messages in either D6500 mode or SIA mode, depending on the programmable option selected. Refer to Appendix B: Internal Messages on page 58 and Appendix C:

Modem IIIa2 Messages on page 61 for a list of the messages and their descriptions.

Figure 12: Message sent to printer

MM/DDsHH:MMsLxxSIA ACCT aaaa

+++TEXT 1

+++TEXT 2

34 Bosch Security Systems, Inc. 1/07 4998122703-01