Bosch Appliances D6100, D6600 manual 3.2.2Ademco Contact-IDMessage Type a, Message sent to printer

Conettix D6600/D6100 Computer Interface Manual 3.0 Computer Communication Protocols

3.2.2Ademco Contact-ID (Message Type a)

Contact-ID Example

SIA Mode Description

<LF><CRC><a><sequence#><receiver#><line#>[#aaaa18QXYZGGCCC]<CR>

Table 39: Ademco Contact-ID (Message Type a) Byte Description

	Title	Description
	LF	Standard line feed character.
	CRC	Cyclical redundancy check number.
	Message Type	a
	sequence#	The message sequence number. The valid sequence number range is 0001 to 9999.
	receiver#	The receiver gateway that sent the message. Valid digits are 01 to 99 for the
		D6600/D6100.
	line#	The line number of the line in the receiver gateway that sent the message. Valid digits are 00
	(Line/Group #)	to 99. The receiver uses Line 0 (zero) for internal messages.
	account#	The communicator's account number has four digits.
18		Ademco Contact-ID format number.
	Q	Qualifier, 1 = New event or opening, 3 = New restore or closing, 6 = Previous event.
	XYZ	Class code and event code (refer to Appendix A: Contact ID Event Code Classifications on
		page 53).
	GG	Group number.
	CCC	Zone codes or User ID.

Figure 8: Message sent to printer

mm/ddshh:mmsLxxsCIDsACCTsaaaa+++sACCsa

aaasNNNsEVENT=XYZsG=GGsC=CCC

For lines that are grouped, Gxx appears instead of Lxx.

Table 40: Ademco Contact-ID (Message Type a)

	Printer Output
Characters		Description
CID		Contact-ID format.
Gxx		Grouped Line numbers.
Lxx		Line number.
NNN		If Q = 1, print E/O for new event or
		opening If Q = 3, print R/C for restore or
		closing If Q = 6, print “OLD” for old
		messages and events.

Bosch Security Systems, Inc. 1/07 4998122703-01 29