Allied Telesis 86222-10 manual PCR Module GUI Network affecting No

12 Patch Release Note

PCR: 01131 Module: CORE Network affecting: No

The SHOW CPU command sometimes displayed incorrect CPU utilisation figures. Typically a value of about 74% was reported when in fact the CPU was almost idle. This issue has been resolved.

PCR: 01134 Module: GUI Network affecting: No

Port parameters can now be set correctly using the Layer 3 Switch GUI.

PCR: 01135 Module: GUI,INST Network affecting: No

Clicking the Apply button on a Layer 3 Switch GUI page caused the switch to lock up if no configuration file was set, but boot.cfg was present. This issue has been resolved.

PCR: 01137 Module: IPG Network affecting: No

A fatal error occurred when UDP received a packet with very long UDP packet length. This issue has been resolved.

Features in 86222-01

Patch file details for Patch 86222-01 are listed in Table 10.

Table 10: Patch file details for Patch 86222-01.

Base Software Release File	86s-222.rez
Patch Release Date	11-Jul-2001
Compressed Patch File Name	86222-01.paz
Compressed Patch File Size	187124 bytes

Patch 86222-01 includes the following enhancement for Software Release 2.2.2:

PCR: 01100 Module: DHCP Network affecting: No

The DHCP server identified the wrong port numbers for incoming DHCP requests causing DHCP replies to be sent to the wrong port. This issued has been resolved.

PCR: 01102 Module: IPG Network affecting: No

The IP flow cache occasionally generated a watchdog fatal error. This issued has been resolved.

PCR: 01102 Module: SWI Network affecting: No

Deleting entries from an L3 table occasionally resulted in a watchdog fatal error. This issued has been resolved.

PCR: 01106 Module: PKI Network affecting: No

PKI enrolment no longer causes message validation to fail.

Patch 86222-10 for Software Release 2.2.2 C613-10319-00 REV J