Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers

13

PCR: 01119

Module: IPV6

Network affecting: No

Repeated addition and deletion of an address with the VALID parameter set to or from an IPV6 interface caused a fatal error. This issue has been corrected. The VALID parameter specifies the life of the address, and defaults to INFINITE. The address is deleted when the lifetime expires. The PREF parameter specifies the time that the address is the preferred address of the interface, and defaults to INFINITE. PREF must be less than or equal to VALID. IPV6 now checks and ensures that if either PREF or VALID is specified, PREF is less than or equal to VALID. When an address is deleted the timers are now correctly cleared.

PCR: 01120

Module: IPG

Network affecting: No

IP sometimes passed the wrong port number to PIM, causing PIM to process the wrong port number in its routing table. This issued has been resolved.

Availability

Patches can be downloaded from the Software Updates area of the Allied Telesyn web site at www.alliedtelesyn.co.nz/support/updates/patches.html. A licence or password is not required to use a patch.

Patch 86222-10 for Software Release 2.2.2 C613-10319-00 REV J

Page 13
Image 13
Allied Telesis 86222-10 manual Availability, PCR Module IPV6 Network affecting No