Allied Telesis 86222-10 manual Patch file details for Patch 86222-06 are listed in Table

Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers 7

PCR: 01234 Module: SWI Network affecting: No

A switch port that was transmitting STP BPDUs and also mirroring its transmit traffic to the mirror port caused a fatal error. This issue has been resolved.

Features in 86222-06

Patch file details for Patch 86222-06 are listed in Table 5.

Table 5: Patch file details for Patch 86222-06.

Base Software Release File	86s-222.rez
Patch Release Date	30-Aug-2001
Compressed Patch File Name	86222-06.paz
Compressed Patch File Size	226776 bytes

Patch 86222-06 includes all issues resolved and enhancements released in previous patches for Software Release 2.2.2, and the following enhancements:

PCR: 01188 Module: SWI Network affecting: No

The power supply voltages of the base board PHYs on a Rapier G6 are controlled by a PHY register value, which was incorrectly set. This issue has been resolved.

PCR: 01190 Module: PIM Network affecting: No

In PIM Dense Mode, if a data stream started before PIM hello messages were exchanged, the receiver did not get the data stream. This issue has been resolved.

PCR: 01192 Module: SWI Network affecting: No

The Rapier G6 base ports sometimes experienced spurious link up or link down events. This issue has been resolved.

Features in 86222-05

Patch file details for Patch 86222-05 are listed in Table 6.

Table 6: Patch file details for Patch 86222-05.

Base Software Release File	86s-222.rez
Patch Release Date	24-Aug-2001
Compressed Patch File Name	86222-05.paz
Compressed Patch File Size	223728 bytes

Patch 86222-05 includes all issues resolved and enhancements released in previous patches for Software Release 2.2.2, and the following enhancements:

Patch 86222-10 for Software Release 2.2.2 C613-10319-00 REV J