Allied Telesis 86222-10 PCR Module PRI Network affecting No, PCR Module PIM Network affecting No

Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers 3

PCR: 01248 Module: SWI Network affecting: No

A configuration problem prevented trunking of gigabit ports at 100Mbit speeds. This issue has been resolved. The A39 gigabit copper uplink reverted to autonegotiation after a restart, even if it was configured to a fixed speed. This issue has been resolved. When the port has been configured for a fixed speed, the mode is now set to MDIX, not MDI.

PCR: 01254 Module: PRI Network affecting: No

When an M2 version of the AR020 PRI E1/T1 PIC was installed in a AR040 NSM it was not possible to select the T1 mode of operation regardless of the jumper setting. This issue has been resolved.

PCR: 01256 Module: Firewall Network affecting: No

A fatal error occurred when the firewall discarded disallowed multicast packets. This issue has been resolved.

Features in 86222-08

Patch file details for Patch 86222-08 are listed in Table 3.

Table 3: Patch file details for Patch 86222-08.

Base Software Release File	86s-222.rez
Patch Release Date	09-Nov-2001
Compressed Patch File Name	86222-08.paz
Compressed Patch File Size	291012 bytes

Patch 86222-08 includes all issues resolved and enhancements released in previous patches for Software Release 2.2.2, and the following enhancements:

PCR: 01201 Module: L2TP Network affecting: Yes

Tunnel creation failed when attempting to establish a point-to-point tunnel from an ATR router (tunnel originator) to another vendor’s router. This issue has been resolved.

PCR: 01233 Module: PIM Network affecting: No

When IGMP snooping was enabled, if a member left a group on a port, it could not re-join the group on that port. This issue has been resolved.

Substantial changes have been made to PIM in more recent code releases. These have been retrofitted to 2-2-2 in the patch. Note: these changes have incorporated PCRs 01159 and 01190.

PCR: 01236 Module: PPP Network affecting: No

The PPPoE access concentrator did not stop RADIUS accounting when a PADT termination was received without receiving a proper PPP termination first. This issue has been resolved.

Patch 86222-10 for Software Release 2.2.2 C613-10319-00 REV J