Allied Telesis 86222-25 PCR Module Firewall Network affecting No, PCR Module Network affecting No

2 Patch Release Note

Some of the issues addressed in this patch include a Level number. This number reflects the importance of the issue that has been resolved. For details on level numbers, please contact your authorised distributor or reseller.

Features in 86222-25

Patch 86222-25 includes all issues resolved and enhancements released in previous patches for Software Release 2.2.2, and the following enhancements:

PCR: 02300 Module: Firewall Network affecting: No

If the command ADD FIREWALL POLICY RULE SOURCEPORT=ALL was executed, a value of “65535” was incorrectly displayed for the SOURCEPORT parameter for that rule in the SHOW FIREWALL POLICY command. This issue has been resolved.

PCR: 02400	Module:	Network affecting: No
	CORE,FFS,FILE,INSTALL,SCR

If a problem occurred with NVS, some critical files were lost. As a result, the equipment was forced to load only boot ROM software at boot time. This patch combined with the new version of the boot ROM software (pr1-1.2.0 for the AR700 series) resolves this issue.

PCR: 02530 Module: FIREWALL Network affecting: No

The GBLIP parameter in the ADD FIREWALL POLICY RULE ACTION=NONAT command is optional. However, if the command was executed without the GBLIP parameter set, the command erroneously failed after a CREATE CONFIGURATION command was executed. This issue has been resolved.

PCR: 03111 Module: FIREWALL Level: 1

TCP sessions could fail if the public side of the firewall was using Kerberos and the private side had a very slow connection to the firewall. This issue has been resolved.

PCR: 03134 Module: TCP Level: 2

When using the SET TELNET LISTENPORT command, a fatal error sometimes occurred. This issue has been resolved.

PCR: 03135 Module: SWI Level: 2

The TYPE parameter in the SET SWITCH L3FILTER command was not written to the script file correctly if MATCH was set to NONE. This issue has been resolved.

PCR: 03143 Module: VRRP Level:

When the PRIORITY parameter in the SET VRRP command was changed, it was not set correctly when a link was reset. This issue has been resolved.

PCR: 03145 Module: IPG Level: 4

The SET IP ROUTE FILTER command was not processing some parameters.

This issue has been resolved.

Patch 86222-25 for Software Release 2.2.2 C613-10319-00 REV X