50 |
Figure 10: Example output from the SHOW FILE command.
FilenameDevice Size CreatedLocks
flash | 111764 | 0 | |||
flash | 2013756 | 0 | |||
flash | 123268 | 15:58:16 | 0 | ||
release.lic | flash | 32 | 16:43:49 | 0 | |
test.cfg | flash | 1698 | 10:39:42 | 0 | |
sixteenalongfile.scp | flash | 24 | 15:10:12 | 0 |
The Locks field indicates the number of concurrent software processes using the file.
The switch automatically compacts FLASH memory when a maximum threshold of deleted files is reached. Compaction frees space for new files by discarding garbage. A message will appear when FLASH compaction is activated. Another message appears when FLASH compaction is complete.
While FLASH is compacting, do not restart the switch or use any commands that affect the FLASH file subsystem. Do not restart the switch, or create, edit, load, rename or delete any files until a message confirms that FLASH file compaction is completed. Interrupting flash compaction may result in damage to files.
Using Scripts
When you start or restart the switch, or when it automatically restarts, it executes the configuration commands in the boot script. A boot script is a text file containing a sequence of standard commands that the switch executes at startup. The default boot script is called boot.cfg. Commands run from a boot script are limited to 128 characters.
The commands you enter into the switch from the command line affect only the dynamic configuration in RAM, which is not retained over a power cycle. The switch does not automatically store these changes in FLASH memory. When the switch is restarted, it loads the configuration defined by the boot script, or if the switch was restarted using the RESTART command, any script file specified in the RESTART command.
In addition to the boot configuration script that the switch automatically runs when it restarts, you can run a configuration script manually at any time, by entering the command:
ACTIVATE SCRIPT=filename
You can also set a trigger to automatically execute a configuration script when a specified event occurs.
For more information about how to create and run scripts, see the Scripting chapter in the
For information about creating triggers, see the Trigger Facility chapter in the
Software Release 2.6.1