Allied Telesis AT-FS705LE manual Installing the Unit on a Wall

5.Attach the data cables to the switch ports. Do not use a cross-over cable to connect workstations or servers to ports 1 through 5. Do not use a cross-over cable to connect another switch or hub to the Uplink port.

Note

You can use either port 5 or the Uplink port on an AT-FS705LE switch, but you cannot use both simultaneously.

6.Go to the procedure “Verifying and Troubleshooting the Installation” on page 16.

Installing the Unit on a Wall

For wall-mount installation, you can position the switch vertically or horizontally on the wall using the keyhole cutouts in the bottom of the switch chassis.

1.If previously attached, remove the rubber feet and all cables and the DC power cord from the switch.

2.Select a wall location for the switch.

14