FARGO electronic S000256 manual Magnetic Intensity Adjustment magnetic encoding installed, Pn #

RESTRICTED USE ONLY FARGO Electronics, Inc.

Magnetic Intensity Adjustment (magnetic encoding installed)

The Persona C25 Card Printer has magnetic encoding installed as a factory option. When originally ordering a Persona C25 Card Printer from the factory, be sure to specify the Printer with or without a magnetic encoder. (Note: If the Printer was manufactured without the encoding module hardware installed, the magnetic head cannot be added later.)

•The intensity of the magnetic encoding head can be automatically set to either high or low coercivity from the Printers software driver.

•As a factory installed option, the magnetic encoder is set to an ISO standard of 2750 Oersteds for high-coercivity and 300 Oersteds for low-coercivity. (Note: This Oersted setting is acceptable for the vast majority of card readers used on the market.)

•For older established systems, the coercivity level may need to be increased for reliable readability.

Typically on these systems, the Oersted level needs to be raised to 4000 for the high- coercivity readers. See figure below.

Reviewing the RP5 Location (Main Circuit Board Layout)

Fargo Electronics

PN # xxxxxx

Rev. X

Persona→ C25 Card Printer User Guide (Rev. 4.0) 70