FARGO electronic S000256 manual Resolving the Image Placement problem

RESTRICTED USE ONLY FARGO Electronics, Inc.

Resolving the Image Placement problem

Symptom: Printing is cut off or is not centered on the card, or a white border appears.

Step	Procedure
1	Determine if the Image Placement option within the Calibrate tab is set
	correctly.
	a.	From the Computer, open the Printer control panel.
	•	If using Windows 95/98/ME, right click on the Persona C25 Card Printer Icon
		and select properties.
	•	If using Windows NT 4.0 right click on the Persona C25 Card Printer and
		select Document Defaults.
	•	If using Windows 2000/XP, right click on the Persona C25 Card Printer and
		select Printing Preferences.
	b.	Click on the Calibrate tab in the Persona C25 Card Printer Driver.
	c.	Adjust the Vertical and/or Horizontal Image Placement settings based on
		where the white border is on the card.
2	Adjust the Image Placement
	a. Disconnect power from the Printer.
	b. Remove the Rear Cover.
	c. Adjust the Potentiometer labeled RP3 one-quarter turn clockwise.
	d. Run a self-test by holding down the Pause/Resume Button while reapplying
		power.
	e. Once printed, the green and red bars on the self-test card should be of
		equal length. If they are not, a further adjustment may be needed.
		Continued on the next page

Persona→ C25 Card Printer User Guide (Rev. 4.0) 53