FARGO electronic S000256 manual Reviewing the Glossary of Terms continued, CR-79

RESTRICTED USE ONLYFARGO Electronics, Inc.

Reviewing the Glossary of Terms (continued)

Term	Definition
CR-79	A card dimension standard of 2.0625" L X 3.3125" W (+/-0.002"
	W, +/-0.005" L) or 52.400 X 84.150 mm.
CR-80	A card dimension standard of 2.125" X 3.370" (+/-0.002" W, +/-
	0.005" L) or 53.975 X 85.598 mm.
CR-90	A card dimension standard of 2.375" X 3.625" (+/-0.002" W, +/-
	0.005" L) or 60.325 X 92.075 mm.
CR-100	A card dimension standard of 2.625" X 3.875" (+/-0.002" W, +/-
	0.005" L) or 66.675 X 98.425 mm.
Cursor	The marker in the LCD Display Window that indicates the active
	selection.
Darkness	A reference to color saturation.
DB-9	A 9 pin, D-shaped connector, typically used in serial port
	interfaces.
DC Motor	A Motor that works on DC with continuous motion.
DC (Direct Current)	Electronic flow that is unidirectional, flowing from the positive (+)
	to negative (-) of a power source.
Default	A setting or parameter that comes preset from the factory in
	Driver or firmware. Performance parameters may be customized
	in the Driver, but can be reset to the factory values usually
	through the push of the default button. The default values for the
	firmware are usually denoted on a label attached to the Printer.
Defrag	Abbreviation for defragmenting. The process of reformatting data
	on a hard drive so that it uses space more efficiently.
DIP switches (Dual	A small array of mechanical switches installed on the board that
In-line Package	can be configured to change Printer operations including
Switches)	providing a variety of self-tests.
	Continued on the next page

Persona→ C25 Card Printer User Guide (Rev. 4.0) 158