RESTRICTED USE ONLY | FARGO Electronics, Inc. |
Printer Components: Top Cover to Power Port (continued)
Component | Description |
|
|
|
|
Ready LED | When ON, this light indicates the Printer is ready for operation. When |
|
Light | OFF, this light indicates the Printer is either OFF or paused and will not |
|
| operate. |
|
| If this light is flashing, a Printer error has occurred. (Note: Refer to the |
|
| Printer's LCD display for the specific type of error that occurred. See the |
|
| LCD/SmartGuard Messages in Section 2, page 9.) |
|
|
|
|
On / Cancel | The On/Cancel button turns the Printer power ON and OFF. It also |
|
Button | serves to cancel the current print job and reset the Printer for the next |
|
| print job if an unrecoverable print error has occurred. |
|
| If a card is left within the Printer after a print job is canceled, it will |
|
| automatically be ejected when the Printer is turned back ON. (Note: |
|
| With the Top Cover(s) open, this button can also be used to guidely |
|
| rotate the feed Rollers forward. This is helpful when cleaning the Printer |
|
| or if clearing jammed media.) |
|
|
|
|
Pause / | The Pause/Resume button allows the User to pause the Printer at any |
|
Resume | time during operation. Note, however, that the Printer will always finish |
|
Button | its current task before pausing. |
|
| If the Pause/Resume button is pressed in the middle of printing the |
|
| magenta ribbon panel, the Printer will pause only after the entire magenta |
|
| panel has printed. (Note: The Ready LED Light will turn OFF when the |
|
| Printer is paused and ON again when operation is resumed. With the |
|
| Top Cover(s) open, this button can also be used to guidely rotate the |
|
| feed Rollers backward. This is helpful when cleaning the Printer or if |
|
| clearing jammed media.) |
|
|
|
|
Access Card | This is the slot in which a SmartGuard Access Card is inserted when |
|
Slot | using the Printer's included SmartGuard Security Feature. (Note: This |
|
| unique option prevents the Printer from operating unless a custom |
|
| access card is inserted. It also allows the User to print custom |
|
| SmartShield Security Images which glow under ultraviolet light.) |
|
|
|
|
Card Input | Load blank cards into this Hopper. |
|
Hopper |
|
|
|
|
|
| Continued on the next page | |
Persona→ C25 Card Printer User Guide (Rev. 4.0) | 14 |
|
