RESTRICTED USE ONLY | FARGO Electronics, Inc. |
Applying Power
The power supply included with the printer is a universal power supply properly configured for the power used in your country. To connect this power supply to the printer, locate the appropriate power cord for your country and refer to the following steps:
Caution: The included power supply is designed for use only with the color ID card printer. If you have any double about the plug configuration or voltage, do not attempt to use the printer. Contact your authorized reseller for information on the correct power supply configuration.
Step | Procedure |
|
|
1 | Place the power cord into the power cord port of the power supply. |
|
|
Persona→ C25 Card Printer User Guide (Rev. 4.0) | 142 |
|
