FARGO electronic S000256 manual Maintaining the Cleaning Rollers continued

RESTRICTED USE ONLYFARGO Electronics, Inc.

Maintaining the Cleaning Rollers (continued)

Step Procedure

4Reach down in between the empty Ribbon Drive Hubs and lift the Cleaning Roller Assembly straight up and out of the Printer. (Note: It may help to push in the spring loaded Ribbon Drive Hub when removing or inserting the Cleaning Roller Assembly.)

5Once the Cleaning Roller Assembly is removed, clean the Rollers using one of the adhesive-backed Cleaning Cards from the Printer Cleaning Kit.

•With the card’s adhesive backing paper removed, slide the card in between the two Rollers until all dust particles are removed from both Rollers.

•If you do not have a Cleaning Card, use a piece of standard clear adhesive tape.

•Use the stick side of the tape to life dust from the Rollers.

6Once all dust is removed from the Rollers, place the Roller Assembly back into the Printer, replace the Ribbon, and close the Printer’s cover.

Persona→ C25 Card Printer User Guide (Rev. 4.0) 136