Electrolux EI30EF35JS, EI30EC45KB manual Setting fresh clean, To start fresh clean

Fresh Clean 45

Setting fresh clean

Aself-cleaning oven automatically cleans itself using much higher temperatures than those used for cooking. The self-clean feature eliminates soils completely or reduces them to a fine powdered ash that you can later easily wipe away with a damp cloth.

Fresh clean combines self-clean with an added air freshening feature. The air cleaner will eliminate baked on food odors during self-clean but may not eliminate all odors. The air cleaner is not active for other oven functions.

IMPORTANT

The first fresh clean cycle will not be odor-free.These odors are normal and are a result of the manufacturing process. It is recommended to ventilate the area. Open any windows and turn on an exhaust fan or overhead range hood (if available) during the fresh clean cycle.

The fresh clean feature provides 3 different clean time settings for self-cleaning. Set clean for 2 hours for light, 3 hours for normal or 4 hours for heavier soils.

To start fresh clean:

Example

Step Press

Once active, the door lock motor will begin locking the oven door. "door Loc" (Figure 4) will appear in the display. DO NOT try to open the oven door when the "door Loc" message is on (allow about 15 seconds for the oven door to completely lock). DO NOT force the oven door open. This could damage the door locking system. Once the oven door is locked the "door Loc" message will turn off and "CLn" (Figure 5) will remain in the display for the entire clean cycle.

Fig. 4 Fig. 5

To stop fresh clean at any time, press CANCEL.

When the fresh clean cycle has finished:

1.The time of day and "Hot" will show in the display (Figure 6).

2.Once the oven has cooled (about 1 hour) and "Hot" is no longer displayed, the "door OPn" message will appear (Figure 7). When this message turns OFF the door has finished unlocking.

Fig. 6 Fig. 7

1.The oven should be empty and all oven racks removed. Remove all items from the cooktop. Be sure the oven door is completely closed.

2.Press fresh clean once for a 3- hour clean time (Figure 1); twice for a 4-hour clean time (Figure 2) or 3 times for a 2-hour clean time (Figure 3).

3.Press START.

Fig. 1 Fig. 2

Fig. 3

3.When the oven is cool, wipe away any residue or powdered ash from the oven interior using a damp cloth or paper towel.

NOTES

•Self-clean will not operate if ANY surface elements are active.

•A self-clean cycle will not start if the control lock feature is active.

•When the self-clean feature is active, you may check the amount of clean time remaining by pressing the self-clean key once.

•If a self-clean cycle was started but did not finish due to a power failure, your oven may not have completely cleaned.