Electrolux EI30EC45KB Luxury Glide oven racks, Removing and replacing Luxury-Glide oven racks

18Oven Cooking

Luxury Glide™ oven racks

IMPORTANT

Remove ALL oven racks before starting a self- clean cycle. If oven racks are left inside the oven during a cleaning cycle, the slide ability of the Luxury-Glide™oven racks may be damaged and all of the oven racks will lose their shiny finish. Clean oven racks according to the instructions provided in the Care & Cleaning section.

The fully extendable Luxury-Glide™rack makes food preparation easier. This oven rack has glide tracks that allow the rack to be pulled away from the oven without rubbing the sides of the oven wall.

Removing and replacing the

Luxury-Glide™ oven racks

To remove - Using one hand, reach through handle opening and lift up on the release lever located across the lower front of the rack as shown in Figure 1.

While holding up the release lever, pull the glide rack out of the oven until the stop position is reached (see Figure 2). Using both hands, grasp the upper and lower portions of the glide rack. Lift up the front of the rack slightly and continue to pull the rack away from the oven (see Figure 3). Be sure to grasp both upper and lower rack portions together when removing or handling the glide rack . The rack portions move independently and are difficult to handle unless held together.

To replace - grasp both upper and lower portions of glide rack, lift and hold the rack level between the oven cavity walls. Tilt the front of the rack upward slightly and slide the rack completely into position. Some force may be necessary to make sure the oven rack has snapped completely into place.

IMPORTANT

To prevent possible damage to the oven, DO NOT attempt to close the oven door until all the oven racks are fully positioned back inside the oven cavity.

Luxury-Glide™ extendable oven rack

release

lever

Fig. 1

Fig. 2

Fig. 3

upper rack portion

lower rack portion