Electrolux EI30EC45KB, EI30EF35JS manual Removing and replacing the oven door, To replace oven door

50Care and Cleaning

Removing and replacing the oven door

CAUTION

To prevent possible burns, do not attempt to remove the oven door until the oven has completely cooled.

IMPORTANT

The oven door is heavy. Be careful when removing and lifting the door. Do not lift the oven door by the handle.

To remove the oven door:

1.Open oven door completely (Figure 1).

2.Pull the hinge locks on both left and right hinges down from the oven frame completely towards the oven door (Figure 2). A tool such as a small flat-blade screwdriver may be required.

3.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle).

4.Close the door to the broil stop position. The oven door will stop into this position just before fully closing.

5.With the oven door in the broil stop position (Figure 3), lift and carefully pull the oven door away from the oven frame. To avoid finish damage, be careful not to allow the oven door hinges to contact the oven front frame.

To replace oven door:

1.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle).

2.Holding the oven door at the same angle as the removal position (See “Removing the oven door” section), carefully line up and insert both door hinge arms between the pins located on each side of the oven door frame (Figure 1).

3.With both door hinge arms in place, open the oven door (Figure 2).

4.Push the door hinge locks up towards and into the oven frame for both left and right oven door hinges to the locked position (Figure 3).

5.Close the oven door.

Fig. 1

	CK
O
L

Fig. 2

about 10°

oven door

hinge

Fig. 3

roller

pin

hinge

arm

Fig. 4