ENGLISH

Preparing the remote controller

Before using the remote controller:

 

 

• Aim the remote controller directly at the remote

 

sensor on the main unit. Make sure there is no

 

obstacle in between.

 

 

SRCD

 

 

DISP

 

 

ATT

 

 

SEL

1 2 3 4

Remote sensor

Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness of the remote controller decreases, replace the battery.

1.Remove the battery holder.

1)Push out the battery holder in the direction indicated by the arrow using a ball-point pen or a similar tool.

2)Remove the battery holder.

(back side)

1)

2)

2.Place the battery.

Slide the battery into the holder with the + side facing upwards so that the battery is fixed in the holder.

Lithium coin battery (product number: CR2025)

3.Return the battery holder.

Insert again the battery holder pushing it until you hear a clicking sound.

(back side)

WARNING:

Store the battery in a place where children cannot reach.

If a child accidentally swallows the battery, consult a doctor immediately.

Do not recharge, short, disassemble or heat the battery or dispose of it in a fire.

Doing any of these things may cause the battery to give off heat, crack or start a fire.

Do not leave the battery with other metallic materials.

Doing this may cause the battery to give off heat, crack or start a fire.

When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may start to give off heat, crack or start a fire.

Do not poke the battery with tweezers or similar tools.

Doing this may cause the battery to give off heat, crack or start a fire.

CAUTION:

DO NOT leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. Otherwise, it may be damaged.

This receiver is equipped with the steering wheel remote control function.

If your car is equipped with the steering wheel remote controller, you can operate this receiver using the controller.

See the Installation/Connection Manual (separate volume) for connection to utilize this function.

6

Page 6
Image 6
JVC KD-SH9102 manual Preparing the remote controller, Installing the battery, Remove the battery holder, Place the battery