JVC KD-SH9103 manual Selecting a preset service using the preset service list, Service you want

2 Select the DAB band (DAB1, DAB2, or DAB3).

	SRC	1 Press and hold SRC for more
		than 1 second.
		The band indication on the
		display starts flashing.
		2 Within about 5 seconds (while
	DAB1
DAB3		the band indication is
		flashing), press SRC again.
	DAB2	Each time you press the
		button, the band changes.

3 Select the number (1 – 6) for the preset DAB service (primary) you want.

1 2 3 4 5 6

Note:

If the selected primary service has some secondary services, pressing the same number button repeatedly will tune in to the secondary services.

Selecting a preset service using the preset service list

If you forget what services are stored in what preset number, you can check the preset service list, then select your desired service on the list.

1 Select the DAB tuner.

2 Select the DAB band (DAB1, DAB2, or DAB3).

1Press and hold SRC for more

SRC

		than 1 second.
		The band indication on the
		display starts flashing.
		2 Within about 5 seconds (while
	DAB1
		the band indication is
DAB3		flashing), press SRC again.
	DAB2	Each time you press the
		button, the band changes.

3 Press and hold 5 (up) or ∞ (down) until the preset ensemble (primary service) list for the current band (DAB1, DAB2, or DAB3) appears on the display.

Note:

You can show the other DAB band preset ensemble (primary service) lists (DAB1, DAB2, or DAB3) by pressing 5(up) or ∞(down).

4 Select the number (1 – 6) for a

ENGLISH

SRC

Each time you press the button, the source changes as described on page 7. When you select a source, the power automatically comes on.

service you want.

1 2 3 4 5 6

65