JVC KD-SH9101, KD-SH9104 Basic Operations, Turning on the power, To drop the volume in a moment

BASIC OPERATIONS

									Display indication:
SRC	D								If you have changed
	DISP								some PSM items (see
ATT									T/P
									pages 47 and 48), the
								MODE	indications on the
	SEL	1	2	3	4	5	6	M	display you see may be
									different from those used
									in this manual.

2 1, 3

ENGLISH

Turning on the power	3 Adjust the volume.
1 Turn on the power.	ATT
ATT

Clock time

Note on One-Touch Operation:

When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.

2 Select the source.

Each time you press the button,

SRC

the source changes as follows.

	*1			*2	*1
TUNER		DAB		CD	CD-CH
		(DAB tuner)		*3	(CD changer)
			LINE IN

*1 Without connecting the DAB tuner or CD changer, you cannot select it as the source to play.

*2 If a disc is not in the loading slot, you cannot select CD as the source to play.

*3 When “Line In” is set to “Off” in the PSM setting, you cannot select “LINE IN” as the source (see page 49).

Current DSP mode (see page 32)

Current sound (iEQ) mode (see page 35)

4 Select the DSP mode and sound mode as you want.

To drop the volume in a moment

Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.

To resume the previous volume level, press the button briefly again.

•If you turn the control dial, you can also restore the sound.

To turn off the power

Press for more than 1 second.

•If you turn off the power while listening to a disc, playback will start from where playback has been stopped previously, next time you turn on the power.

7