JVC KD-SH9103, KD-SH9104 Using PTY Standby Reception, To set PTY Standby Reception, Codes. See

7When the current source is other than FM,	3 Select one of the twenty-nine PTY
the TP indicator lights up.
If a station starts broadcasting a traffic	codes. (See page 21.)
announcement, “Traffic Flash” appears on the		Selected code name
display, and this unit automatically changes the	ATT	appears on the display
source and tunes in to the station.		and is stored into
		memory.

ENGLISH

Using PTY Standby Reception

PTY Standby Reception allows the unit to switch	4 Finish the setting.
temporarily to your favorite programme (PTY:
Programme Type) from any source except AM	SEL
stations.

To select your favorite PTY code for PTY Standby Reception

When shipped from factory, PTY Standby Reception has been set to work for searching for “News” programmes.

You can select your favorite programme type for PTY Standby Reception.

1 Press and hold SEL (select) for more

To set PTY Standby Reception

When the DAB tuner is connected, the following operations will set PTY Standby Reception both for the FM tuner and the DAB tuner. (See page 69.)

MODE

1Press MODE (M) while listening to

than 2 seconds so that one of the PSM items appears on the display.

an FM stereo broadcast.

M

(PSM: see pages 47 and 48.)

SEL

2 Press number button 4 to select “TUNER”—Tuner category of the PSM settings.

The “PTY Stnby” (standby) setting screen appears on the display.

“Mode” appears on the display, and the number buttons start flashing.

1 2 3 4 5 6

CONTINUED ON THE NEXT PAGE

17