JVC KD-SH9103, KD-SH9104, KD-SH9102 manual LCD Type, To select the font on the display Font Type

To select the display illumination pattern

—LCD Type

You can select the display illumination patterns according to your preference.

• Auto:	Positive pattern will be selected
	during the day time (depending on
	the “Dimmer” setting); on the other
	hand, negative pattern will be used
	during the night time (depending on
	the “Dimmer” setting).

•Positive: Positive (normal) pattern of the display.

•Negative: Negative pattern of the display.

To select the font on the display

—Font Type

You can change the font types used on the display. Select either “1” or “2” according to your

preference.

To turn the tag display on or off—Tag

An MP3 and WMA track can contain track information called “Tag” where its album name, performer, track title, etc. are recorded.

•On: Turns on the Tag display while playing MP3 or WMA tracks.

•If a track does not have Tags, folder name and track name appear.

•Off: Turns off the Tag display while playing MP3 or WMA tracks. (Only the folder name and track name appear.)

Notes:

•If you change the setting from “Off” to “On” while playing a track, the tag display will be activated when the next track starts playing.

•For MP3 tracks only: There are two versions—ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). When both ID3v1 and ID3v2 are recorded, ID3v2 will be shown.

To change the FM tuner selectivity

—IF Filter

In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.

•Auto: When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be lost.)

•Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost.

To turn on/off the key-touch tone—Beep

You can deactivate the key-touch tone if you do not want it to beep each time you press a button.

•On: Activates the key-touch tone.

•Off: Deactivates the key-touch tone.

To select the telephone muting— Telephone

This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “Muting1” or “Muting2,” whichever mutes the sounds from this unit.

•Muting1: Selects this if this setting can mute the sounds when using the cellular phone.

•Muting2: Selects this if this setting can mute

	the sounds when using the cellular
	phone.
• Off:	Cancels the telephone muting.

To turn on/off the line input switch

—Line In

You can switch off the line input when no external component is connected to the LINE IN plugs.

•On: You can select “LINE IN” as the playback source.

•Off: You cannot select “LINE IN” as the playback source.

To turn on/off the power amplifier switch— PowerAmp

You can switch off the built-in amplifier and send the audio signals only to the external amplifier(s) to get clear sounds and to prevent internal heat buildup inside this unit.

•On: When not using external amplifier(s).

•Off: When using external amplifier(s).

ENGLISH

49