JVC KD-SH9102, KD-SH9104 manual What you can do more with, Using Announcement Standby Reception

ENGLISH

What you can do more with

DAB

With the DAB tuner connected, you can use the following convenient functions.

•Road Traffic Flash Standby Reception

•Standby Reception of 9 types of Announcement signals

•PTY Standby Reception

•PTY search

•Tracing the same program (service) automatically while driving where the same DAB ensemble is not received

•If you press the button while listening to any other source than AM

–The TP indicator comes to light up when a service supporting Road Traffic Flash signal (or an FM RDS station supporting TA signal) is tuned in by the built-in tuner. This receiver now stands by for the Road Traffic Flash signal (or TA signal) reception.

–The TP indicator keeps flashing when a service supporting Road Traffic Flash signal (or an FM RDS station supporting TA signal) is NOT tuned in by the built-in tuner. In this case, this receiver cannot stand by for Road Traffic Flash signal (or TA signal) reception.

Road Traffic Flash Standby Reception

Press T/P briefly to activate

T/PRoad Traffic Flash Standby

Reception.

Each time you press the button,

Road Traffic Flash Standby

Reception turns on and off.

•When this function is turned on, the TP indicator lights up or flashes (as follows).

How Road Traffic Flash Standby Reception works:

If a Road Traffic Flash (or Traffic Announcement) starts broadcasting while the Road Traffic Flash Standby Reception is activated, “Traffic Flash” appears and the unit tunes into the service (or FM RDS station) broadcasting Road Traffic Flash (or Traffic Announcement). The volume increases to the preset TA volume level and the Road Traffic Flash (or Traffic Announcement) can be heard.

TP indicator appears (either lights up or flashes)

•If you press the button while listening to a service supporting Road Traffic Flash signal, the TP indicator lights up.

This receiver now stands by for the Road Traffic Flash signal reception.

•If you press the button while listening to a service NOT supporting Road Traffic Flash signal, the TP indicator flashes.

In this case, Road Traffic Flash Standby Reception does not work.

–If an FM RDS station supporting TA signal is tuned in by the built-in tuner. This receiver stands by for the TA signal reception and the TP indicator lights up.

Using Announcement Standby Reception

Announcement Standby Reception allows the unit to switch temporarily to your favorite service (Announcement type).

To select your favorite announcement type for Announcement Standby Reception

When shipped from factory, Announcement Standby Reception has been set to work for searching for “Travel” services.

You can select your favorite announcement type for Announcement Standby Reception.

•If you do not want to change the announcement type (from “Travel” to another one), go to page 68.

66