JVC KD-SH9104 manual Storing DAB services in memory, Tuning in to a preset DAB service, Comes on

ENGLISH

Storing DAB services in memory

You can preset up to 6 DAB services in each DAB band (DAB1, DAB2, and DAB3) manually.

1 Select the DAB tuner.

	Each time you press the button,
SRC	the source changes as described
	on page 7. When you select a
	source, the power automatically
	comes on.

2 Select the DAB band (DAB1, DAB2, or DAB3).

5 Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds.

1

The display pattern automatically changes to the initial display pattern and the preset number flashes (then the previous display

SRC

DAB1

DAB3 DAB2

1Press and hold SRC for more than 1 second.

The band indication on the display starts flashing.

2Within about 5 seconds (wile the band indication is flashing), press SRC again. Each time you press the button, the band changes.

pattern resumes).

6 Repeat the above procedure to store other DAB services into other preset numbers.

Notes:

• You can only preset primary DAB services. If you

store a secondary service, its primary service will

be stored instead.

3 Tune in to an ensemble you want.

4 Select a service of the ensemble you want to listen to.

Press 5 (up) to select the next service.

Press ∞ (down) to select the previous service.

• A previously preset DAB service is erased when a

new DAB service is stored in the same preset

number.

Tuning in to a preset DAB service

You can easily tune in to a preset DAB service. Remember that you must store services first. If you have not stored them yet, “Storing DAB services in memory.”

1 Select the DAB tuner.

Each time you press the button,

SRCthe source changes as described on page 7. When you select a source, the power automatically comes on.

64