HP 8360 Save Lock, Save User Preset, User’s, S-2Operating and Programming Reference

Save Lock

Function Group SYSTEM

Menu Map 8

Description This softkey lets you disable the save function. It prohibits the saving of the present instrument state into a save/recall memory register. If this function is active, an error message is displayed. An asterisk next to the key label indicates that this function is active.

Programming Codes SCPI:

SYSTem:KEY:DISable SAVe

SYSTem:KEY:ENABle SAVe

Analyzer: SHSV locks the registers, SHRC unlocks the registers.

See Also ISAVE), Security Menu

“Saving and Recalling an Instrument State,” in Chapter 1. “Programming Typical Measurements,” in Chapter 1.

Save User Preset

Function Group SYSTEM

Menu Map 8

Description This softkey lets you store the present state of operation to be used as the PRESET state. Set the synthesizer to the desired operating conditions. Select Save User Preset . The display shows:

- - > User Defined Preset Saved

Programming Codes

See Also

To activate this stored information, you must set the preset mode to User.

SCPI: SYSTem:PRESet:SAVE

Analyzer: NONE

Preset Mode User

“Changing the Preset Parameters,” in Chapter 1.

S-2 Operating and Programming Reference	HP 8360
User’s	Handbook