assign softkey, A-22 attenuator, uncouple, U-l attenuator uncouple, M-14 attenuator, value set, S-59 auto fill increment, A-22

auto fill number of points, A-23 auto fill start, A-24

auto fill stop, A-25

automatically set sweep time, S-76 automatic sweep time, l-10 automatic trigger, stepped sweep, S-69 auto track, A-26

auto track failed message, 2a-1 auxiliary interface connector, C-6 auxiliary output connector, C-5

B backdating, 5-l bandwidth

ALC, A-9, A-10, A-11 AM, A-12, A-13

amplitude modulation, A-12, A-13 beginning frequency

flatness correction, A-24 frequency list, A-24

bits

in general status register model, l-101

summary bit in general status register model, l-102 blank display, B-l

BNC connectors, C-4 Boolean parameters

discussed in detail, l-84 explained briefly, l-75

brackets, angle, l-64

BUS

trigger source defined, l-113

C cabinet, clean, 4-5 cables

HP-IB, C-8 calco fail, F-3

calibrate sweep span always, S-74 calibrate sweep span once, S-75 calibration

full user, F-19 sweep span, F-16

calibration failed message, 2a-2 calibration, user functions, U-3 calman fail, F-4

calY0 fail, F-4

center frequency, l-8, C-l CW coupled, C-14

center frequency marker, C-l CF/span sweep mode, zoom, Z-l change correction value, C-3

Index-3