HP 8360 AM Type 100%/V, REGISTER, ANALYZER STATUS, User’s Handbook, Programming Codes, ANALYZER STATUS REGISTER

AM Type 100%/V

Function Group

Menu Map

Description

ANALYZER STATUS REGISTER

MOD (MODULATION)

4

This softkey (Option 002 only) scales the amplitude modulation function linearly. The amplitude of the RF output changes linearly as a function of AM input changes (or at a rate set by softkey for internal AM). S ee “Specifications” for the AM characteristics, input range, and damage level. An asterisk next to the key label indicates that this feature is active.

Programming Codes	SCPI:
	AM:TYPE LINear	.
	Analyzer: AM1 function on, AM0 function off
See Also	m), CONNECTORS, (MOD_)

“Optimizing Synthesizer Performance” in Chapter 1.

ANALYZER STATUSREGISTER

Function Group

Menu Map

Description

NONE

NONE

The following is the status register structure of the synthesizer when the analyzer programming language is selected. This status structure is the structurally and syntactically the same as on the HP 8340/41.

OS(2B) Output Status bytes, is used to read the two 8-bit status bytes from the synthesizer. The first status byte concerns the cause of an SRQ (Service Request), while the second status byte concerns failures and faults, as follows:

HP 8360	Operating and Programming Reference A-19
User’s Handbook