HP 8360 Saving and, Recalling an, Instrument State, 1-16Getting Started Basic

Saving andRecalling anInstrument State

The save/recall registers store and access a previously set instrument state. For example, set the synthesizer to sweep from 3 to 15 GHz at a -10 dB power level, with markers 1 and 2 set at 4.5 and 11.2 GHz.

Press [START) (7J (GHz).

Press (STOP) (7J (?J (GHz.

P r e s s ( P O W E R LEVEL] I - ] (iJ (TJ 0).

Press (MARKER).

Select Marker Ml @ 0 @ IGHz).

Select Marker M2 0 0 0 @ (GHzl.

To save this instrument state in register 1, press (SAVE) (iJ. To verify that the synthesizer has saved this state:

Press (PRESET).

Press (RECALL) (iJ.

Press [MARKER).

The active entry area displays:

--> RECALL REGISTER: 1 RECALLED

Notice the sweep end points, power level, and the asterisks next to the marker 1 and 2 key labels.

You can save instrument states in registers 1 through 8. Register

0 saves the last instrument state before power is turned off. When power is turned on, register 0 is automatically recalled.

1-16 Getting Started Basic