HP 8360 manual Listmode?

SCPI COMMAND SUMMARY

before changing to the next frequency. After *RST, the value is 100 PUS (MIN).

•LIST:DWELl:POINts? [MAXimumlMINimum]

Returns the number of dwells entered using the LIST:DWELl command. After *RST returns a 1.

•LIST:FREQuency (Cnum>[freq suffix] lMAXimumlMINimum)i*801

•LIST:FREQuency?

Sets and queries a list of frequencies that the synthesizer phase locks to in the sequence entered when the list mode is selected.

*RST value is the (MAX + MIN)/2.

•LIST:FREQuency:POINts? CMAXimumlMINimum]

Returns the number of frequencies that have been entered into the list frequency array. After *RST returns a 1.

•LIST:MANual <num>

•LIST : MANual?

Sets and queries the list point number to go to and lock. The value is a unitless value that is limited between 1 and the maximum number of points in either of the three arrays. This command has no effect unless the list mode is set to manual. This value may be bumped if the number of list frequencies is changed. *RST value is 1.

•LIST:MODE AUTOlMANual

•LIST:MODE?

Selects and queries whether the list is played back automatically or manually as described in LIST : MANual.

LIST:MODE	LIST:TRIGger:SOURce How the list is played back.
AUTO	IMMediate	Each new frequency point is
		stepped to automatically,
		after waiting the specified
		DWELl time.
AUTO	BUS	Wait for a <GET> or *TRG
		over the HP-IB before
		advancing to the next
		frequency in the list.
AUTO	EXTernal	Wait for a signal to be
		received on the external
		input before advancing to
		the next frequency in the
		list.
MANual	Don’t care	Only the list point
		specified by LIST:MANual
		is played back.

HP 8360	Operating and Programming Reference S-39
User’s Handbook