HP 8360 Menu Map, See Also, Description, Function Group, Programming Codes SCPI: *SAV <num

S

Function Group

Menu Map

Description

SYSTEM

8

This hardkey allows up to eight different front panel settings to be stored in memory registers 1 through 8. Synthesizer settings can then be recalled with the [RECALL) key. A memory register can be alternated with the current front panel setting using the

Atrnate Regs softkey.

The information stored in memory registers is retained in memory indefinitely when ac line power is constantly available, or for approximately three years without line power. Pressing [PRESET) does not erase the memory registers (1 through 8).

Register 0 is a memory register also. It saves the last front panel settings automatically) and can not be accessed through the LSAVE) key. Likewise, register 9 is reserved for user preset storage and can not be accessed with the [SAVE) key. Pressing (PRESET) erases register 0, but not register 9.

Programming Codes SCPI: *SAV <num>

The above is an IEEE 488.2 common command.

Analyzer: SVn, where n= a numeric value from 1 to 8.

See Also Altrnate Regs, Clear Memory, Cm), Save Lock “Saving and Recalling an Instrument State,” in Chapter 1. “Programming Typical Measurements,” in Chapter 1.

HP 8360	Operating and Programming Reference S-l
User’s Handbook