Marker Ml

Function Group MARKER

Menu Map 3

Description The softkeyslabeled Marker Ml through Marker M5 function identically. The softkey turns the marker off/on. When an asterisk appears next to the key label, it indicates that the marker is on, but not necessarily active. A marker is only active when it is indicated in the active entry area.

The active entry area displays the active marker and its frequency value. Use the rotary knob, the ARROW keys, or the entry keys to set the frequency. Markers are displayed normally as Z-axis intensity dots, but can be changed to amplitude pulses (Amp1 Markers ). When a marker is turned off, the frequency value of that marker

is retained in memory. If the marker is reactivated, the stored frequency value is recalled for that marker.

The frequency value of Ml and of M2 can also be used to define parameters in two other marker features: Ml--M2 Sweep and

Start-Ml Stop=M2.

Programming Codes SCPI:

MARKer[l][:FREQuency] <num>[freq suffix] or

MAXimumIMINimum

MARKer[l]:STATe ON]OFF]l]O

Analyzer: Ml function on, MO function off.

See Also Amp1 Markers, Ml--M2 Sweep,(mj, MkrRef Menu,

Start=Ml Stop=!42

“Marker Operation,” in Chapter 1.

“Programming Typical Measurements,” in Chapter 1.

M-4 Operating and Programming Reference

HP 8360

 

User’s Handbook