HP 8360 manual Monitor Menu, Mudule Select Rear

Mudule Select Rear

Function Group

Menu Map

Description

Programming Codes

See Also

POWER and FREQUENCY

2 and 5

This command causes the synthesizer to examine only the rear panel source module interface connector to determine the type of source module (if any) connected. The instrument frequency limits and multiplier are altered according to the source module connected. However, the leveling point is not changed. See

Leveling Point Module to set the synthesizer to level at the

output of the source module.

An asterisk next to the key label indicates this feature is active.

SCPI:

SYSTem:MMHead:SELect FRONt(REARINONE SYSTem:MMHead:SELect?

Analyzer: NONE

Module Menu

Monitor Menu

Function Group (MOD)

Menu Map 4

Description This softkey (Option 002 only) accesses the menu which allows you to output internally-generated AM and FM waveforms to the rear panel AM/FM OUTPUT connector. It also accesses the softkeys which allow you to display the AM depth and FM deviation of the modulation waveforms.

ModOut On/Off AM Outputs the AM waveform to the AM/FM

OUTPUT connector.

Modflut On/Off FM Outputs the FM waveform to the AM/FM

OUTPUT connector.

Meter On/Off AM Displays the AM depth of the modulating signal.

M-28 Operating and Programming Reference	HP 8360
	User’s Handbook