HP 8360 zoom, List Menu, Freq Offset, Step Swp Menu, Up/Down Size CW, FREQUENCY (MENU), Up/Down Size Swept, F-18Operating ahd Programming Reference

FREQUENCY (MENU)Freq Offset

List Menu

Step Swp MenuUp/Down Size CWUp/Down Size Sweptzoom

Sets the frequency offset value and applies it to all frequency parameters.

Displays the frequency list create/edit softkeys.

Reveals the stepped frequency sweep edit soft keys.

Sets the frequency step size in the CW frequency mode.

Sets the frequency step size in the swept frequency mode.

Places the synthesizer in the CF/AF sweep mode, where the rotary knob and numeric entry keys control CF, and the up/down arrow keys control AF.

See Also Softkeys listed above.

“Optimizing Synthesizer Performance” in Chapter 1.

Freq Mult

Function Group FREQUENCY

Menu Map 2

Description This softkey lets you set a frequency multiplier value and applies it to all frequency parameters. Any integer value between and including f36 is accepted. Changing the multiplier value changes the display, it does not affect the output of the synthesizer.

For example:

1.Set the start frequency to 4 GHz.

2.Set the stop frequency to 10 GHz.

3.Set the frequency multiplier to 5.

Note that the display indicates start=20 GHz, stop=50 GHz and asterisks appear next to the frequency data.

4.Now set the stop frequency to 30 GHz. The synthesizer frequency is 6 GHz, or 30 GHz + 5.

Frequency multiplier and offset are related as shown by the following equation:

Entered value or Displayed Frequency = (Frequency Generated x Multiplier) + Offset value

F-18 Operating ahd Programming Reference	HP 8360
	User’s Handbook