FARGO electronic S000256 manual LCD and SmartGuard Messages, Reviewing the Top Line LCD Messages

RESTRICTED USE ONLY FARGO Electronics, Inc.

LCD and SmartGuard Messages

The LCD display shows the current status of the Printer. Refer to the cause and solution Tables in this section for all possible LCD messages. (Note: These Tables display the LCD messages in alphabetical order. If the LCD message is communicating an error or requires an action, these Tables will also offer a solution to what should be done.)

Reviewing the Top Line LCD Messages

Message	Cause	Solution
Card Jam: Flip	A card is jammed in the Flipper Table	See the Resolving the Card
	area of the Printer.	Jam: Flip Error Message
		procedure on page 39.
Card Jam: Mag	A card is jammed in the Magnetic	See the Resolving the Card
	Encoding Module, beneath the Flipper	Jam: Mag Error / Smart Error
	Table.	Message procedure on page 39.
Card Jam: Print	A card is jammed somewhere along	See the Resolving the Card
	the printing path, under the Printer's	Jam: Print Error Message
	top-right cover.	procedure on page 38.
Card Out/Not	Either the Card Hopper is out of cards	See the Resolving the Card
Fed	or the Printer is unable to feed a card	Feeding Errors procedure on
	in from the Card Hopper.	page 34.
Flipper Jam	Card Flipping Mechanism is unable to	See the Resolving the Flipper
	rotate.	Jam error message procedure
		on page 37.
Flipping Card	Indicates card is being flipped for	No action is required.
	backside printing.
Head-down	Printhead is unable to lower itself.	See the Resolving the Headlift
Failed		error message procedure on
		page 40.
		Continued on the next page

Persona→ C25 Card Printer User Guide (Rev. 4.0) 23