FARGO electronic S000256 manual Calibrating the Color Ribbon Sensor

RESTRICTED USE ONLYFARGO Electronics, Inc.

Calibrating the Color Ribbon Sensor (continued)

Steps Procedure

8Return the DIP switches to the normal OFF position.

9a. Run the self-test procedure. See the Performing the Standard Self Test procedure on page 57.

b.If the Printer functions properly, re-attach the back cover to the Printer.

10Align the Clear or the Yellow panel over the LED portion of the Ribbon Sensor and close the Top cover, as shown below.

LED portion of

Ribbon Sensor

Persona→ C25 Card Printer User Guide (Rev. 4.0) 78