FARGO electronic S000256 manual Printer Components Top Cover to Power Port, Description

RESTRICTED USE ONLY		FARGO Electronics, Inc.
Printer Components: Top Cover to Power Port
Component	Description
Print Top	Opens to allow access to the Printhead, print ribbon, and card path. (Note:
Cover	This cover must be closed in order for the Printer to begin printing.)
Cover	Unlatches the Top Cover.
Release
Buttons
Printhead	Printer component that prints. (Note: This component is fragile and must
	not be bumped or touched with anything other than a cleaning pen.)
Card	Automatically cleans cards for higher print quality.
Cleaning
Cartridge
LCD Display	The LCD display shows the User the current status of the Printer. The top
	line of the LCD reports the status of the printing functions.
	When the Printer is first powered ON, the Printer's startup screen will
	appear displaying the current firmware version and the amount of installed
	Printer memory (4MB or 16MB).
	Once the Printer has finished its startup system check, it will then display
	Printer Ready to indicate that the Printer is ready for operation.
	During operation, the LCD will also indicate the specific ribbon panel being
	printed, and if any printing errors have occurred.
On LED Light	Indicates the Printer power is either ON or OFF.
	Continued on the next page

Persona→ C25 Card Printer User Guide (Rev. 4.0) 13