RESTRICTED USE ONLY

FARGO Electronics, Inc.

Printer Components: Centronics-Type Parallel Interface

The Card Printer is equipped with a standard 8-bit Centronics-type parallel interface port.

(Note: This communication port is the means through which the Printer receives data from the computer. The Printer's parallel interface connector is a standard 36-pin Amp type with two metal-wire retaining clips and is ECP (Extended Capabilities Port) compatible. It mates with a standard, bi-directional PC to Printer parallel cable.)

This section describes the pin assignments and signal specifications for this port.

Caution: Keep the interface cable to less than 6 feet in length.

PersonaC25 Card Printer User Guide (Rev. 4.0)

16

 

Page 16
Image 16
FARGO electronic S000256 manual Printer Components Centronics-Type Parallel Interface