RESTRICTED USE ONLY | FARGO Electronics, Inc. |
Section 5: Printer Setup
Choosing a good location
Place the unit in a location with adequate air circulation to prevent internal heat build up.
Step Procedure
1Use the dimensions specified in Section 9 as a guideline for the minimum clearances to the unit. NOTE: Allow for adequate clearance above the unit to accommodate the height of the unit with its cover open.
2Do not install unit (a) near heat sources such as radiators or air ducts, or (b) in a place subject to direct
About Moisture Condensation
If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense inside the unit. Should this occur, print quality may not be optimum. Leave the unit turned OFF in a warm, dry room for several hours before using. This will allow the moisture to evaporate.
Unpacking and Packing the Printer
Unpacking the Persona C25 Card Printer
The purpose of this section to provide the User with a specific unpacking procedure for the Persona C25 Card Printer.
Step Procedure
1While unpacking your printer, inspect the carton to ensure that no damage has occurred during shipping.
Make sure that all supplied accessories are included with your unit. The following items should be included with your printer: Printer, Power Supply, Cleaning Roller Assembly
2Save the carton and packing materials.
Persona→ C25 Card Printer User Guide (Rev. 4.0) | 140 |
|
