FARGO electronic S000256 manual Reviewing the Top Line LCD Messages continued, Cause, Solution

RESTRICTED USE ONLYFARGO Electronics, Inc.

Reviewing the Top Line LCD Messages (continued)

Message	Cause	Solution
Rasterize	Indicates the Printer is loading the	See the SmartGuard User’s
Shield	SmartShield security image from the	Guide for more information.
	SmartGuard Access Card into its
	memory. Appears when a valid
	access card containing a SmartShield
	image is first inserted into the Printer.
	(Note: If SmartShield image is
	named, the name will also appear
	along with this message on the
	bottom line of the LCD Display.
	Appears only when using the
	SmartGuard Security Feature.)
Reading Key	Indicates the Printer is reading the	See the SmartGuard User’s
Data	data from the SmartGuard Access	Guide for more information.
	Card. Appears when a valid access
	card is first inserted into the Printer.
	Appears only when using the
	SmartGuard Security Feature.
Rib Calib Failed	Indicates that an attempt at calibrating	See the Resolving the
Error	the ribbon Sensor through the Printer	Skipping Ribbon Panel
	Driver has failed.	problem procedure on page
		40.
Ribbon	Indicates either the print ribbon is out	See the Resolving the Ribbon
Error/Out Error	or a ribbon error has occurred.	Low error message procedure
		on page 42.
Ribbon	The print ribbon has become jammed	See the Resolving the Ribbon
Jam/Out Error	in the Printer Rollers, it is stuck to the	Breaking problem procedure
	surface of the card, or it is out.	on page 43.
		Continued on the next page

Persona→ C25 Card Printer User Guide (Rev. 4.0) 26