RESTRICTED USE ONLYFARGO Electronics, Inc.
Resolving the Card Feeding Errors (continued)
Step | Procedure | |
|
| |
2 | Ensure the Card Separator Flap is set correctly | |
| a. | Loosen the two screws on either side of the card width guides in the Input |
|
| Hopper. See Graphic 1. |
| b. | Open the Top Print Cover |
| c. | Adjust the screws on either side of the orange card separator flap to raise |
|
| or lower the separator flap to the desired height. See Graphic 2. |
|
|
|
Persona→ C25 Card Printer User Guide (Rev. 4.0) | 35 |
|
