FARGO electronic S000256 manual Cleaning the Card Feed Rollers, Continued on the next page

RESTRICTED USE ONLY FARGO Electronics, Inc.

Cleaning the Card Feed Rollers

The Card Feed Rollers move the card throughout the print process.

Caution: Clean these Rollers to prevent card jams and card contamination, and to provide better print quality and extended Printhead life.

Step	Procedure
1	a.	Ensure consistent Printer operation by cleaning these Rollers
		approximately every 250 prints or as needed depending on the cleanliness
		of the card stock and the environment in which the Printer is located.
	b.	Clean if the Rollers appear dirty or if the cards start showing speckles or
		debris on the printed surface.
	c.	Refer to Steps 2 to 5 (in this procedure) to clean all these Rollers through
		a single, easy process:
2	a.	Open the Printer's Top Cover, and remove all card, print ribbon, from the
		Printer.
	b.	Leave the Printer power ON and the Top Cover open throughout this
		procedure. (Note: The Card Cleaning Cartridge can also remain within
		the Printer during this cleaning process.)
3	Get a Cleaning Card from the Printer Cleaning Kit, and remove its adhesive
	backing paper.
				Continued on the next page
			Card Feed Rollers

Persona→ C25 Card Printer User Guide (Rev. 4.0) 133