FARGO electronic S000256 manual Dye-Sub and Resin Intensity Adjustments, RP1 potentiometer

RESTRICTED USE ONLY FARGO Electronics, Inc.

Dye-Sub and Resin Intensity Adjustments

Reviewing the RP1 Potentiometer location (Printhead Darkness RP1 Pot)

RP1 is the baseline level control for the Printhead intensity.

Step	Procedure
1	a. Turn the RP1 potentiometer counter-clockwise in 1/8th turn increments to
	increase the overall darkness level, and affect both Dye-Sub and Resin
	transfer levels.
	b. Turn the pot clockwise by the same amount, which causes the output to lighten
	the intensity.
2	a. When the Printhead is replaced or if using another brand of blank cards, run
	the self-test. See the Performing the Standard Self Test procedure on page
	57.
	b. Use the results of the Standard self test to make appropriate adjustments to
	the RP1 potentiometer.

DARKNESS	Rp7 OFFSET PRN	Rp6
Rp1	OFFSET MAG RP3	OFFSET LAM

Tp3

Tp5

COLOR

Persona→ C25 Card Printer User Guide (Rev. 4.0) 65