
Installation
Install the Unit
Install the unit on a flat surface
Remove the mounting brackets.
Attach the stabilizing feet. Attach the stabilizing feet (included) to the bottom of the unit before placing it on a flat surface to avoid scratching the surface and to protect the unit.
Install the unit in a rack or enclosure
Use four screws to secure the mounting brackets to the rails in the rack or enclosure.
Connect A/C Power
Connect the unit to A/C power
Note: If the unit is connected to A/C power, the unit is actively monitoring input power, but is operating in Standby mode.
Use the A/C power cord to connect the unit to A/C power. If the unit is functioning properly, the display will illuminate.
APC A/V | 3 |