Power Threshold. The amount of power used by a device in Sleep or Standby mode varies between devices. It may be necessary to adjust the threshold at which the Master outlet signals the Controlled outlets to shut down.
1.Ensure a master device is connected to the Master outlet. Put that device into Sleep or Standby mode, or turn it OFF.
2.Press STATUS and hold for three seconds.
3.The G50 unit will display now recognize the threshold level of the Master device and save it as the new threshold setting. Use the UP or DOWN arrow key to adjust the power threshold.
POWER THRESHOLD: 10 W
TRACKING POWER
SUCCESSFULLY
Green Function. Use the Up and Down arrow buttons to enable or disable the green function. The Green Function allows you to utilize the MASTER and CONTROLLED outlets. When the device plugged into the MASTER outlet goes into Sleep or Standby mode, or turns off, the equipment that is connected to the CONTROLLED outlets will also turn off, saving electricity.
GREEN FUNCTIONS
DISABLE
Utility Rate. Enter electrical power utility rate in cents/kWh (USD only). The
UTILITY RATE 12 cents/kWh
Contact Information. This screen can be customized to include the contact information of the A/V dealer or installer. Push the STATUS button to move the cursor to the next letter and use the Up and Down arrow buttons to scroll to the appropriate letter.
WWW.APCAV.COM
Maximum and Minimum Voltages. Set the voltage range in which the unit should normally operate. The unit will protect connected equipment from high and low voltages that are not safe for operation.
MAX UPPER VOLT: 140V
MIN LOWER VOLT: 92V
Clear Saved Power. Reset the counter for the amount of power saved that has been saved by the unit.
CLEAR SAVED PWR
YES
APC A/V | 9 |
