Manuals / Allied Telesis / Computer Equipment / Switch

Allied Telesis AT-FS750/16, AT-FS750/24 manual Installing the Switch in an Equipment Rack

Models: AT-FS750/24 AT-FS750/16 FS750/24 FS750/16

1 44

Download 44 pages 58.93 Kb

Page 32

Installing the Switch in an Equipment Rack

Chapter 2: Installation

Installing the Switch in an Equipment Rack

To install the switch in a standard 19-inch equipment rack, perform the following procedure:

1.If attached, remove the rubber feet using a flat-head screwdriver.

2.Install a rack-mount bracket on one side of the switch using a Phillips screwdriver and four of the rack-mount screws included with the switch. Figure 7 and Figure 8 illustrate installing the brackets on the AT-FS750/16 and AT-FS750/24 Switches, respectively.

838

Figure 7. Attaching the Rack-Mount Bracket to the AT-FS750/16 Switch

864

Figure 8. Attaching the Rack-Mount Bracket to the AT-FS750/24 Switch

3.Repeat step 2 to attach the remaining bracket to the other side of the switch.

32

Image 32

Allied Telesis AT-FS750/16, AT-FS750/24 manual Installing the Switch in an Equipment Rack

Contents

AT-FS750/16 AT-FS750/24 Installation GuideFast Ethernet Smart Switches Copyright 2007 Allied Telesis, Inc Electrical Safety and Emissions Standards FCC Class A, EN55022 Class A, CISPR Class A, C-TICK, CEU.S. Federal Communications Commission Radiated EnergyTranslated Safety Statements Contents Contents Figures Figures Tables Table 1. Safety SymbolsMDI Pin Signals 10Base-T or 100Base-TX MDI-X Pin Signals 10Base-T or 100Base-TXTables Preface ˆ “Safety Symbols Used in this Document” on pageˆ “Where to Find Web-based Guides” on page ˆ “Contacting Allied Telesis” on pageSafety Symbols Used in this Document SymbolMeaning DescriptionWhere to Find Web-based Guides Sales or Corporate Information Warranty Management Software UpdatesContacting Allied Telesis Online Support Email and Telephone Support Returning ProductsOverview ChapterFeatures AT-FS750/24 24-Port 10/100Mbps + 2 SFP/1000T Combo WebSmart Switch Front and Back PanelsAT-FS750/16 16-Port 10/100Mbps + 2 SFP/1000T Combo WebSmart Switch Ports Uplink Combo PortsTwisted Pair Ports RS-232 Console PortDescription LEDsState State DescriptionState DescriptionPower Supply Power Workgroup Topology Network TopologiesCollapsed Backbone AT-FS750/16Chapter 1 Overview Installation ChapterReviewing Safety Precautions Circuit Overloading Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern. E21 Selecting a Site for the Switch Cable Specifications MaximumSpeed Type of CableUnpacking the Switch Installing the Switch on a Desktop Installing the Switch in an Equipment Rack Figure 9. Mounting the AT-FS750/16 Switch in an Equipment Rack Figure 10. Mounting the AT-FS750/24 Switch in an Equipment RackInstalling an Optional SFP Transceiver 4. Slide the transceiver into the SFP slot until it clicks into place Chapter 2 Installation Cabling the Switch Powering On the Switch Troubleshooting ChapterChapter 3 Troubleshooting Technical Specifications Physical SpecificationsEnvironmental Specifications Power SpecificationsSignal Safety and Electromagnetic Emissions CertificationsConnectors and Port Pinouts Signal PairSignal Appendix A Technical Specifications